Products
Shure BETA98H/C Clip-on Instrument Microphone with Attached Preamplifier (XLR connection)
- $320.18
($349.00 incl GST)
Miniature instrument microphone delivers high gain-before-feedback and rejection of unwanted noise. It features preamplifier circuitry to improve linearity across the full frequency range, and tailored response for natural sound reproduction.
Note: Phantom Power is required
Out of Stock
Product is unavailable. Notify me when product is available
The BETA®98H/C and the wireless version WB98H/C are premium cardioid condenser instrument microphones that clamp onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
FEATURES
- The Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
- The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
- The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
- The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
- Legendary Shure ruggedness and reliability
What is the Beta 98H/C best suited to?
It’s a premium instrument microphone with a flexible gooseneck and clip on clamp making it ideal for use with brass, percussion and woodwind instruments, either on stage or in the studio.
What are the charactaristics of the Beta 98H/C?
It has a tailored frequency response of 20Hz – 20KHz and a high maximum sound pressure level of 132dB (SPL). It has cardioid pickup pattern providing high gain before feedback. It includes a 3 m (10ft) high-flex cable which is attached to the preamplifier. The pre-amp requires phantom power and connects to your mixer via an XLR connection.
The microphone is also available with others version that come with a drum clamp - model Beta 98D/S or with no clamp Beta 98S
- Cartridge Type: Electret Condenser
- Frequency Response: 20 to 20,000 Hz
- Polar Pattern: Cardioid
- Output Impedance: 150 Ω
- Sensitivity (at 1 kHz, open circuit voltage): –56 dBV/Pa (1.6 mV) (1 Pascal=94 dB SPL)
- Maximum SPL (1 kHz at 1% THD, 1KΩ load): 155 dB SPL
- Equivalent Output Noise (A-weighted): 31 dB SPL (typical)
- Dynamic Range (at 1 kHz, 1KΩ load): 124 dB 132 dB
- Clipping Level (1 kHz at 0.25% THD, 1KΩ load): 3 dBV (1.4 V)
- Signal-to-Noise Ratio (Referenced at 94 DB SPL at 1 kHz): 63 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Power Requirements: 11–52 VDC phantom power (IEC-61938), 1.2 mA
- Shure BETA98H/C Clip-On instrument Condenser Microphone
- with attached 10' (3 m) High Flex Cable and Preamplifier
- 2 x Snap-On Windscreens
- Storage Bag
2 Years
