Shure AD4D Axient Digital Dual-Channel Wireless Receiver

Products

Shure AD4D Axient Digital Dual-Channel Wireless Receiver

($6,219.00 incl GST)

Compatible with all AD series and ADX series transmitters.

Out of Stock

Product is unavailable. Notify me when product is available

Product Details
-

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4D Two-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

FEATURES:

Wide tuning range up to 184 MHz
True digital diversity reception per channel for drop-out resistance
Networked control with Wireless Workbench® software and ShurePlus™ Channels iOS app
Front panel headphone jack enables Dante™ Cue and Dante™ Browse monitoring
Configurable Ethernet switch for redundant Dante or AES67 digital output
AES3 output
Channel Quality meter displays RF signal-to-noise
Locking AC connectors
DC module version available to support redundant power

Product Specifications
+

SPECIFICATIONS

Dimensions (H × W × D): 1.7 × 19.0 × 13.1 in (44 × 483 × 333 mm)
Weight: 10.1 lb (4.6 kg) without antennas
Housing: Steel; extruded aluminum
Power Requirements: 100 to 240 VAC, 50–60 Hz, 0.68 A max
Thermal Dissipation: Maximum: 23 W (78 BTU/hr), Idle: 15 W (51 BTU/hr)

AUDIO OUTPUT

Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration:
- 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Transformer-Coupled Balanced (1=ground, 2=audio +, 3=audio –)
Impedance (Typical, XLR Line Out): 100 Ω
Full Scale Output (200 kΩ load):
- 1/4" (6.35 mm): +8 dBV
- XLR (LINE setting): +18 dBV
- XLR (MIC setting): –12 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection: Yes

NETWORKING

Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)

CASCADE OUTPUT

Connector Type: BNC (Note: For connection of one additional receiver in the same band)
Configuration: Unbalanced, passive
Impedance: 50 Ω
Insertion Loss: 0 dB, typical

RF INPUT

Spurious Rejection: >80 dB, typical
Connector Type: BNC
Impedance: 50 Ω
Bias Voltage: 12-13.5 VDC, 150 mA maximium, per antenna, switchable on/off
RF Carrier, Frequency Range, Model-Dependent:
- AD4D=A: 470–636 MHz
- AD4D=B: 606–810 MHz
- AD4D=C: 750–960 MHz