Products
Shure PSM300 (P3TR112GR) Wireless Personal Monitor System with SE112 Earpiece
- $999.08
($1,089.00 incl GST)
P3TR112GR Wireless Personal Monitor System Set include: P3R Wireless Bodypack Receiver & P3T PSM®300 Wireless Transmitter & SE112 Sound Isolating Earphones
The PSM300 Personal Monitor System delivers wireless stereo monitoring for improved clarity and reduced feedback over traditional stage wedges. Performers can create their own custom mixes by adjusting the stereo blend and overall volume level at the bodypack, resulting in lower volume on stage and enhanced audio detail. Easy to set up and operate, PSM300 features one-touch frequency syncing and solid wireless RF stability between transmitters and receivers. With rugged, dependable hardware and hard-working technology, Shure PSM300 Personal Monitor Systems deliver a greatly improved monitoring experience on stage.
FEATURES
- Send two channels of audio wirelessly to performers onstage
- Solid RF connection over a 300 foot (90 meter) range
- Create a personal mix on each bodypack with adjustable stereo balance or MixMode® two-channel mono blend.
- Up to 90 dB signal-to-noise ratio provides clear, detailed audio at any volume
- Systems available with Shure Sound Isolating™ earphones
- One-touch scan and IR sync quickly and easily assigns a clean wireless channel
- No complicated menus, just simple volume and mix controls that focus on the performance
- All-metal half-rack transmitter
- Slim, lightweight bodypack attaches easily to a belt or guitar strap
P3T Specifications:
- RF Output Power: 10, 20, 30 mW (Note: varies by region)
- RF Output Impedance: 50 Ω (typical)
- Net Weight: 783 g (27.6oz.)
- Dimensions: 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D
- Power Requirements: 12–15 V DC, 260 mA maximum
Audio Input
- Connector Type: 6.35 mm (1/4") TRS
- Polarity: Tip positive with respect to ring
- Configuration: Electronically balanced
- Impedance: 40 kΩ (actual)
- Nominal Input Level: Switchable, +4 dBu, -10 dBV
- Maximum Input Level:
- +4 dBu: +22 dBu
- -10 dBV: +12.2 dBu
- Pin Assignments: Tip=hot, Ring=cold, Sleeve=ground
- Phantom Power Protection: Up to 60 V DC
Audio Output
- Connector Types: 6.35 mm (1/4") TRS
- Configuration: Electronically balanced
- Impedance: Connected directly to inputs
P3R Specifications:
- Active RF Sensitivity (at 20 dB SINAD): 2.2 μV
- Image Rejection: >90 dB
- Adjacent Channel Rejection: >60 dB
- Intermodulation Attenuation: >50 dB
- Blocking: >60 dB
- Audio Output Power (1 kHz @ <1% distortion, peak power, @32 Ω): 80 mW (per output)
- Minimum Load Impedance: 16 Ω
- Headphone output: 3.5 mm (1.8") stereo
- Net Weight: 98 g (3.5 oz.) (without batteries)
- Dimension: 110 × 64 × 21 mm H × W × D
- Battery Life (continuous use): 5–7 hours, AA batteries
- P3T Wireless Transmitter
- P3R Wireless Bodypack Receiver
- SE112-GR Sound Isolating Earpiece
- 2 x AA Batteries
- Zipper Bag
- Detachable 1/4 Wave Antenna
- Rackmount and Hardware Kit
- BNC Cable
- BNC Bulkhead Adapter
- External Power Supply
2 Years
