Products
Shure ULXD24/B58 Digital Wireless Handheld Microphone System with BETA58A Capsule
($2,659.00 incl GST)
Large conference and convention installations come with unique wireless challenges. A campus-wide solution, ULX-D® Digital Wireless is secure, scalable, and durable. From managing diverse sound sources to protecting RF from smartphones and other stray signals, the intelligent system solves wireless problems of all sizes.
Note: This model will be delivered in individual packaging of ULXD4 and ULXD2/B58.
Out of Stock
Product is unavailable. Notify me when product is available
Shure ULX-D® Digital Wireless offers uncompromising 24-bit audio clarity and extremely efficient RF performance with single, dual, and quad channel receivers for any size professional sound reinforcement application. Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.
Uncompromising Professional Digital Wireless
- 24-bit/48 kHz digital audio that delivers incredibly clear and accurate sound reproduction
- 20 Hz – 20 kHz frequency range with flat response
- Greater than 120 dB dynamic range
- Wide selection of trusted Shure Microphones
- Available in UHF, VHF and ISM (900MHz) Frequency Bands
Extremely Efficient and Reliable RF Performance
- Up to 64 MHz overall tuning range (region dependent)
- Up to 17 active transmitters in one 6 MHz TV channel (22 on an 8 MHz TV channel)
- High Density mode enables up to 47 active transmitters in one 6 MHz TV channel
- Rock-solid signal stability with no audio artifacts over the entire 100 meter range
- Optimized scanning automatically finds, prioritizes, and selects the cleanest frequencies available
Scalable, Intelligent Hardware
- Single (half-rack), Dual and Quad (full-rack) receiver form factors
- AES 256-bit encryption equipped for secure wireless transmission
- Dante™ digital networked audio over Ethernet
- Wireless Workbench® 6 compatible for advanced coordination, monitoring and control; features Site Survey tool for scanning frequencies in the 902-928 MHz ISM band
- Compatible with the Shure SB900A Rechargeable Battery and SBC chargers
ULXD4 Specifications
- Dimensions: 197 mm × 171 mm × 42 mm (7.75 in. × 6.75 in. × 1.65 in.), H × W × D
- Weight: 913 g (2.0 lbs), without antennas
- Housing: Galvanized Steel
RF Input
- Spurious Rejection: >80 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Bias Voltage: 12 - 13 V DC, 170 mA maximum, per antenna
Audio Output
- Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
- Configuration:
- 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
- XLR: Balanced (1=ground, 2=audio +, 3=audio -)
- Impedance:
- 1/4" (6.35 mm): 100 Ω (50 Ω Unbalanced)
- XLR: 100 Ω
- Full Scale Output:
- 1/4" (6.35 mm): +12 dBV
- XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection:
- 1/4" (6.35 mm): Yes
- XLR: Yes
Networking
- Power Over Ethernet (PoE): No, protected
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Ethernet Cable Length: 100 m (328 ft)
ULXD2 Specifications
- Gain Offset Range: 0 to 21 dB (in 3 dB steps)
- Battery Type: Shure SB900A Rechargeable Li-Ion or LR6 AA batteries 1.5 V
- Battery Runtime @ 10 mW:
- Shure SB900A: >11 hours
- Alkaline: 11 hours
- See Battery Runtime Chart
- Dimensions:
- 256 mm × 51 mm (10.1 in. × 2.0 in.) L × Dia.
- V50, V51 Bands: 278 mm × 51 mm (10.9 in. × 2.0 in.) L × Dia.
- Weight:
- 340 g (12.0 oz.), without batteries
- V50, V51 Bands: 348 g (12.3 oz.), without batteries
- Housing: Machined aluminum
Audio Input
- Configuration: Unbalanced
- Maximum Input Level (1 kHz at 1% THD):
- 145 dB SPL (SM58), typical
- Note: Dependent on microphone type
- Preamplifier Equivalent Input Noise (EIN) - System Gain Setting: ≥ +20 120 dBV, A-weighted, typical
RF Output
- Antenna Type: Integrated Single Band Helical
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Proprietary Digital
- Power:
- 1 mW, 10 mW, 20 mW
- See Frequency Range and Ouput Power table, varies by region
- ULXD4 Single-Channel Digital Wireless Receiver
- ULXD2/B58 Handheld Transmitter with Beta58 Capsule
- 2 x AA Batteries
- Hardware Mounting Kit
- Short Rackmount Bracket with Link Bar
- Long Rackmount Bracket
- 2 x Antennas
- 2 x BNC Antenna Adapters
- 2 x BNC Antenna Cables (22")
- Ethernet Cable (3')
- Power Supply
2 Years
