Products
Shure UA844+SWB Antenna/ Power Distribution System
- $944.04
($1,029.00 incl GST)
It seems like there’s never as much time as you’d like for the sound check. That’s why the UA844+SWB Antenna Distribution System lets you stretch the power of your antenna pairs, giving you more on-air channels in less setup time. So you can set and forget, and have more flexibility to make sure it all sounds perfect.
Out of Stock
Product is unavailable. Notify me when product is available
The Shure Model UA844+ is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs.
A single UA844+ system can support up to five wireless receivers. A maximum of five UA844+ systems may be used in a two-tiered configuration.
Power Requirements
14 to 18 V DC
DC Output
14 to 18 V DC (x4)
Output Current
Combined total from all DC outputs
2.5 A, maximum
Operating Temperature Range
-18°C (0°F) to 63°C (145°F)
Dimensions
45 x 483 x 172 mm (H x W x D)
Net Weight
1.62 kg (3.6 lbs)
Connector Type
BNC
RF Frequency Range
model: UA844+SWB
470 to 960 MHz
Bias Voltage
15 V DC (150 mA, maximum) (x2)
Impedance
50 Ω
RF Frequency Range
model: UA844+SWB
470 to 960 MHz
Output Intercept Point
21 dBm, typical
Connector Type
BNC
Impedance
50 Ω
Output Connector Isolation
30 dB, typical
Gain
Input to any output port (Unused ports terminated in 50 Ω)
-1 to +1 dB
- 2 - 6 ft. (ca. 1,8 m) BNC cables
- 10 - 22 in. (60 cm) BNC cables
- 4 - Locking DC power cables (for ULX4D, ULXP4)
- 4 - Non-locking DC power cables (for QLXD4, SLX4, BLX4R)
- 2 - Bulkhead adaptors
- 1 - Rack mount Hardware kit
- 1 - PS60 Power supply
2 Years
